192.168.0.1 Router Login Password – Complete Details

It is well-known that every Internet-connected device has its own IP address. Different routers have different IP addresses, but 192.168.0.1 is the most common IP address.

This IP address can either be a public or private address for devices. 192.168.0.1 router IP address is a private address for D-Link and Netgear router models. It is a private IP address for the IPv4 network, only accessible to the user.

The router can be accessed by typing the IP address on the browser. Sometimes, people confuse ‘0’ and ‘o’ and type in the wrong address, making it impossible to access the router.

How to Access 192.168.0.1 Router IP Address?

The steps mentioned below should be followed in case the router cannot be accessed repeatedly:

• Please check if you have entered the correct router address, “192.168.0.1“. Sometimes, people type 192.168.o.1 in place of the correct IP address. If you still cannot access the router, then there is a possibility that it is not the correct IP address

• There is a possibility that your router is improperly switched on. So try resetting it.
• Check the firewall filtering enabled on your router and set it accordingly.
• Examine whether the LAN wire is properly connected to your router and your computer or not.
• Check if the device or the wire is broken or not. Repair the broken parts of the device
• If all else fails, you can try resetting the router by pressing the reset button of the router for 15-20 seconds
• If the problem still exists, call your provider and ask for their expert opinion

Router- Default Username-Password and default IP address

Router Manufacturer	IP address	Username	Password
Cisco	192.168.0.1	admin	password
	192.168.0.1	admin	W2402
	192.168.0.1	none	233897301
D-link	192.168.0.1	admin	admin
	192.168.0.30
Huawei	192.168.0.1	admin	admin
Linksys	192.168.0.1	admin	admin
Netgear	192.168.0.1	admin	admin
Netgear	192.168.0.1	admin	password
TP-Link	192.168.0.1
	192.168.0.254	admin	admin/password

How to find the Router IP Address?

If you are wondering how I can find my router IP address or my WiFi IP address, Then, the following steps are to find the router IP address or WiFi IP address on Windows:

– First, open the Command Prompt dialog box from the Start menu and type ‘ipconfig.’

– Next press Enter

– A list of IP addresses will appear. Among them, the IP address listed as Default Gateway is your router’s IP address.

Find the Router IP Address on the Mac

The following steps comprise the second method to find the router IP address in Mac:

• First, click the Apple menu on your Apple computer
• Next, choose ‘System Preferences’ and click the ‘Network’ icon.
• Choose the network connection to your device.
• Select the ‘Advanced’ button and click the ‘TCP/IP’ tab to see the router’s IP address.
• On your Chromebook, click the notification area on the right side of your taskbar.
• Then click the “Connected to” option in the list. The list will also show the connected networks. From there, select the name of the wireless network you’re connected to.
• Next, click the “Network” tab to see the router’s address listed as “Gateway.”

How to Configure the Router/Wireless Router?

These are the steps to configure the router or wireless router for the first time:

• First, connect your computer to the router with a LAN wire.
• Next, open any browser on your computer, enter 192.168.0.1 or http://192.168.0.1 in the address bar, and press Enter.

• Next, a login page will be displayed. Enter the default username and password written on the router, which is generally admin.

• After successfully logging in, you must restart the router and set the SSID name, which is the name of the router visible to others.

• Change the password in Network Security Settings and click Next.

• In the next step, reboot the router one more time to save the settings. Your router is now fully functional.

These steps can also be followed when reconfiguring the device.

How to access 192.168.0.1 on the desktop?

These are the steps you need to follow to access the mentioned IP address:

• First, you must connect your router to your computer via a wired or wireless connection.
• Next, you have to open any browser on your computer.
• Type the address ‘http://192.168.0.1’ on the browser address bar and press Enter.
• A popup box will appear, where you have to type the username and password provided to you.

If you don’t remember the details, you can use the following technique to access the IP address:

TP-LINK Router Login

• To access the Router Admin panel, connect it to your computer with an RJ45 cable.
• Then open any browser and type http://192.168.0.1 into the address bar
• Now, a small window will appear and ask for a username and password
• You cannot log in to the router unless you know the username and password. You can check the model or call your Internet Service Provider for the login details.
• Then, you can see the router homepage, where you can see some options for Wireless Settings and Advanced Settings.

Netgear Router Login

• First, you must power on and connect your router and computer with an Ethernet cable.
• Then, open a browser and enter the IP address 192.168.0.1 in the browser’s address bar.
• Next, enter the username and password in the designated box. The default username and password is ‘admin/password’.
• After a successful login, you can go to Wireless Settings and change the router settings for your convenience.

Asus Wireless Router Login

• First, power your computer and router and connect them wirelessly or with an Ethernet cable.
• Next, you should open the browser and type in the IP address.
• Then, enter the default username and password, and type admin in both boxes.
• After a successful login, you must change your WiFi password and router username. Choose a strong password that combines letters, symbols, and numbers.

In the case of other routers, you can type ‘admin’ as the default username and password. Sometimes, you can type ‘pass’ or ‘password’ in the password box.

Resetting the Password

To change the router’s password, go to advanced settings first. From there, you must choose an admin password. Then click Change it and Save Settings, and it is done. Pressing the router’s reset button for 20 seconds will reset both the username and password to the default ones.